How quickly will I see results?
Some will notice a difference after one treatment (improved skin tone, tightening effect, improvement in the appearance of acne) while others will require more treatments to recognize the full benefits. As is true with any holistic, in-home skin rejuvenation system, results are cumulative and can vary by individual skin type and concern. Each treatment builds upon the last. High frequency can also greatly maximize the benefits of your current creams, lotions and serums by helping them to absorb much more deeply below the dermis than if you simply use them on a standalone basis. If you have been disappointed by the performance of your existing skin care product line-up, use the high frequency facial wand in conjunction with them and notice the enhanced performance.
How long does treatment take?
High frequency treatment is not time consuming and only requires between 2 to 5 minutes per day. This will vary depending on your skin type and concern(s). More frequent application or applying beyond recommended treatment time will not enhance results. Use the system according to the usage guidelines for best results.
How often can I use the system?
We recommended treating with high frequency no more than once per day. More frequent application or applying beyond recommended treatment time will not enhance results. Use the system according to the usage guidelines for best results. Depending on where you live, high frequency can be somewhat drying especially during the winter months. If you find that your skin gets too dry with treatment, we recommend cutting treatment to once every 2-3 days and following up with a quality moisturizer.
Should I use a conductive gel with high frequency?
Using a special conductive medium (gel) during high frequency treatment to improve glide is not necessary and will not improve the performance or benefits derived from treatment. Instead, for best results we advise applying your favorite skin care lotion, cream or serum to your skin prior to high frequency application (for anti-aging treatment). Those with acne-prone skin can apply their acne lotion or cream following high frequency treatment to avoid over drying.
How much current will I feel?
High frequency is a low level oscillating current that can be very soothing, relaxing and revitalizing. A slight tingling or zapping will be felt during treatment. Facial sensitivity rates vary from individual to individual. You can lower or raise the intensity during treatment to suit your personal comfort level by turning the power dial on the unit up or down. This machine is effective even at the lowest intensity setting so it is not necessary to use an extremely high power level to achieve maximum benefits from treatment. For best results, the key is treatment consistency (i.e. using the system regularly according to the usage guidelines).
Can I use high frequency in conjunction with other skin care technologies?
Yes! Many of our customers have realized amazing results by combining their high frequency treatments with other safe and gentle skin rejuvenating technologies such as microcurrent, ultrasonic, red facial light therapy, blue acne light therapy, etc. High frequency works on skin toning rather than muscle toning. If you plan on using muscle toning machines such as microcurrent, galvanic and/or ultrasonic we recommend using high frequency FOLLOWING these applications so that your skin will realize the full benefits of combined treatment. Other treatments such as light based red and blue LED therapy may be used prior to or following high frequency, depending on your personal preference.
Why shouldn't I use AHA, Glycolic Acids or other overly harsh products with the system?
These products are designed to thin out the skin and reduce the appearance of fine lines and wrinkles however they can be extremely drying and should not be used in combination with high frequency treatment. On its own, high frequency promotes a natural exfoliation of the skin using enriched oxygen molecules and is a much more gentle rejuvenation process. For anti-aging and the treatment of acne we advise using hydrating products in conjunction with the system rather than harsh drying ones. If you are intent on using AHA or glycolic products with the system, we advise using them sparingly following high frequency treatment rather than before.
Can I use my acne lotion or cream topical with the system?
The enriched oxygen molecules produced by high frequency produce an exfoliating, cleansing and purifying effect on the skin. Because acne topical can sometimes be overly drying, we recommend applying them following high frequency treatment rather than before. You may want to eliminate your topical's entirely depending on your skin sensitivity. The best approach is to test your skin's tolerance and reaction to using a topical in addition to high frequency.
What creams, lotions or serums do you recommend using with the system?
We recommend that you use your favorite anti-aging and acne products. For best results, we recommend using products with hydrating properties. Those with aging skin and acne can equally benefit from following up with a good Hyaluronic Acid Serum Serum after treatment which is non-oily (won't clog pores or cause acne) and boosts the moisture level in your skin at the same time. High frequency can greatly maximize the benefits of your current creams, lotions and serums by helping them absorb much more deeply below the dermis than if you simply use them on a standalone basis. If you have been disappointed by the performance of your existing skin care product line-up, use the system in conjunction with them and notice the increase in performance.
Can I use high frequency on my areas of rosacea or to treat spider veins?
Do not use the system on skin that is prone to excessive amounts of broken capillaries or rosacea. Having a few broken capillaries is fine.
Can I use the system during pregnancy?
As a precaution, we recommend avoiding high frequency treatment during pregnancy. If in doubt, please consult your physician.
Can I use the system if I have a medical condition or medical device?
Do not use this system if you have a pacemaker or other electrical medical device. If you have any other medical conditions, please consult with your physician prior to using this system.
What is the system's frequency or output in "cycles per second"?
High frequency facial machines can vary in design and appearance however the underlying principle technology and operational functions are very similar. Most high frequency systems operate at a frequency in the range of 100,000-250,000 Hertz (cycles per second). The High Frequency Facial Wand operates around 100,000 cycles per second at the highest intensity level setting which is an output comparable to the discontinued OxyLight. The High Frequency Facial Wand is effective even at the lowest intensity setting so it is not necessary to use an extremely high power level to achieve maximum benefits from treatment. The key to success is treatment consistency (i.e. using the system regularly according to the usage guidelines).
How should I clean the unit's built-in glass electrode bulb?
The best way to clean your high frequency electrode bulb is with a soft damp cloth. Rubbing alcohol may instead be used to remove stubborn residue. If using the system to treat multiple individuals, always thoroughly disinfect electrode using rubbing alcohol after each use to avoid spreading infection.
Usage Guidelines:
1. Thoroughly cleanse your skin and gently pat dry. The elimination of dead skin cells is the first step in any effective facial treatment program. To properly prepare the treatment area to take maximum advantage of high frequency application, we would recommend steaming for a few minutes using a quality Facial Steamer or exfoliating using a quality Microdermabrasion Machine.
2) Apply desired skin care product (it is recommended that those with acne-prone skin apply desired topical acne cream following high frequency application).
3) Plug the wand into power outlet and switch on.
4) Slowly turn the power control dial to the lowest intensity setting. The wand will now begin to quietly "hum" as it begins its high frequency wave action. When touched to the surface of the skin, the glass electrode, in combination with the high frequency current generated by the system, will produce a very safe, and subtle therapeutic neon-violet glow as well as purifying, enriched oxygen molecules with a likeness to the pleasant scent of fresh clean air (Tip: if you are unable to immediately see the violet glow, try standing in a darkened room and gently whisk the wand against your skin).
5) Maximize the effectiveness of your favorite skin care cream or serum by lightly sweeping the high frequency wand over your skin in a circular or zig-zag motion for about 2-5 minutes depending on area being treated.6.Always use a very low intensity dial setting during the first few days of initial use. When you no longer feel the intensity of the high frequency current, continue to work at a slightly higher setting. Continue to increase the intensity setting with each treatment until you reach your personal comfort zone. |
I Love it!!! 
Promising