To remove the Replacement Tip Cartridge: First ensure that Zeno is powered off. Hold Zeno upright in one hand and pull the Tip Cartridge up and off Zeno with the other hand. Take care to pull firmly and directly upward to avoid damaging the microprocessor inter-connection pins on your Zeno. The Zeno Treatment Tip once exhausted has no value; please properly dispose of the exhausted Tip Cartridge.
To attach a new Replacement Tip Cartridge: We strongly recommend that you place Zeno on a flat surface and hold it upright in one hand with the buttons and Data Information Panel facing you. Holding the replacement cartridge in the other hand, align the cartridge so that the Treatment Tip is to the right and above the Treatment Activation Button. Press the cartridge straight down onto Zeno, taking care to press firmly and directly down to avoid damaging the cartridge connector or internal connections on Zeno. Do Not Force! Your Zeno is a carefully manufactured high-quality device; the tip should attach easily. If it does not, recheck your alignment. |